je soupconne mon ordinateur de redemarrer intempestivement suite à des probléme d'alimentation.
J'utilise la commande
Code : Tout sélectionner
sensors
nouveau-pci-0200
Adapter: PCI adapter
GPU core: 912.00 mV (min = +0.80 V, max = +1.19 V)
temp1: +44.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +53.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +49.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +51.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +52.0°C (high = +80.0°C, crit = +100.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: 928.00 mV (min = +0.80 V, max = +1.60 V)
+3.3 Voltage: 3.30 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: 5.12 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: 12.36 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 1654 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS2 FAN Speed: 1214 RPM (min = 600 RPM, max = 7200 RPM)
POWER FAN Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +43.0°C (high = +60.0°C, crit = +75.0°C)
MB Temperature: +43.0°C (high = +45.0°C, crit = +75.0°C)
connaissez vous une commande pour cela ?
mais
Code : Tout sélectionner
# rdmsr 0x198 -u --bitfield 47:32
0
