Hier, ma dernière cession s'est terminée brutalement par une coupure d'alimentation fortuite (un court circuit dans la cuisine), je n'ai (donc) pas l'historique du terminal sur la dernière cession, mais j'ai probablement enfreint, hier, les régles de bonne conduite, en tentant, même plusieurs fois sur sd7 avec les privilèges root
Alors ce que vous dîtes : "créé un fichier de la taille de l'image dans /dev, c'est-à-dire dans la RAM", je ne sais pas si ça a pu aller au bout et si je peux le vérifier ?
J'ai néanmoins réussi à démarrer ce matin, une nouvelle fois en enfreignant les règles : clé restée insérée, extraite au message d'erreur, ce qui explique peut être le "... Volume was not properly unmounted. ..." ci-dessous à la fin du rapport
Il me semble que beaucoup de choses clochent, beaucoup de lignes sont rouges dans le terminal (pas ci-dessous) :
Pratiquement : plus de son depuis des mois, difficultés temporaires de carte graphique ou d'affichage des résolutions, quand ma carte graphique ne donne plus d'affichage je passe à la carte graphique intégré et vice-versa et étonnemment l'affichage se rétablit, warning de disque dur panne imminente, obtention des menus de programmes tardif à l'affichage (2 minutes après le reste)
Code : Tout sélectionner
utilisateur1@debian:~$ dmesg
dmesg: échec de lecture du tampon de noyau: Opération non permise
utilisateur1@debian:~$ su
Mot de passe :
root@debian:/home/utilisateur1# dmesg
[ 0.000000] Linux version 4.19.0-12-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.152-1 (2020-10-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=2904cad1-70df-4887-9ffc-3da40cec687b ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd909fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd90a000-0x00000000ddb1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddb1d000-0x00000000ddc34fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddc35000-0x00000000dedd8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dedd9000-0x00000000dedd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dedda000-0x00000000dee1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dee1d000-0x00000000df232fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7756/H77MA-G43 (MS-7756), BIOS V1.7 07/09/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3093.044 MHz processor
[ 0.001579] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001580] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001586] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.001589] MTRR default type: uncachable
[ 0.001589] MTRR fixed ranges enabled:
[ 0.001590] 00000-9FFFF write-back
[ 0.001591] A0000-BFFFF uncachable
[ 0.001591] C0000-CFFFF write-protect
[ 0.001592] D0000-E7FFF uncachable
[ 0.001593] E8000-FFFFF write-protect
[ 0.001593] MTRR variable ranges enabled:
[ 0.001594] 0 base 000000000 mask F00000000 write-back
[ 0.001595] 1 base 100000000 mask FF0000000 write-back
[ 0.001596] 2 base 110000000 mask FF8000000 write-back
[ 0.001596] 3 base 118000000 mask FFC000000 write-back
[ 0.001597] 4 base 11C000000 mask FFE000000 write-back
[ 0.001597] 5 base 11E000000 mask FFF000000 write-back
[ 0.001598] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.001598] 7 disabled
[ 0.001599] 8 disabled
[ 0.001599] 9 disabled
[ 0.002565] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002667] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.002671] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.011189] found SMP MP-table at [mem 0x000fd790-0x000fd79f]
[ 0.019501] RAMDISK: [mem 0x33b01000-0x35d77fff]
[ 0.019505] ACPI: Early table checksum verification disabled
[ 0.022705] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.022707] ACPI: XSDT 0x00000000DDC26070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.022711] ACPI: FACP 0x00000000DDC2FED8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.022716] ACPI: DSDT 0x00000000DDC26170 009D63 (v02 ALASKA A M I 00000021 INTL 20051117)
[ 0.022718] ACPI: FACS 0x00000000DDC33080 000040
[ 0.022721] ACPI: APIC 0x00000000DDC2FFE8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.022723] ACPI: FPDT 0x00000000DDC30060 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.022725] ACPI: MCFG 0x00000000DDC300A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.022727] ACPI: HPET 0x00000000DDC300E8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.022729] ACPI: SSDT 0x00000000DDC30120 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.022732] ACPI: SSDT 0x00000000DDC30490 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.022734] ACPI: SSDT 0x00000000DDC30E40 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.022740] ACPI: Local APIC address 0xfee00000
[ 0.022808] No NUMA configuration found
[ 0.022809] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.022812] NODE_DATA(0) allocated [mem 0x11eff9000-0x11effdfff]
[ 0.022831] Zone ranges:
[ 0.022831] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.022832] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.022833] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.022833] Device empty
[ 0.022834] Movable zone start for each node
[ 0.022834] Early memory node ranges
[ 0.022835] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.022836] node 0: [mem 0x0000000000100000-0x00000000dd909fff]
[ 0.022836] node 0: [mem 0x00000000dedd9000-0x00000000dedd9fff]
[ 0.022837] node 0: [mem 0x00000000dee1d000-0x00000000df232fff]
[ 0.022837] node 0: [mem 0x00000000df7f4000-0x00000000df7fffff]
[ 0.022838] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.023031] Zeroed struct page in unavailable ranges: 13111 pages
[ 0.023032] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.023033] On node 0 totalpages: 1035465
[ 0.023034] DMA zone: 64 pages used for memmap
[ 0.023034] DMA zone: 21 pages reserved
[ 0.023035] DMA zone: 3996 pages, LIFO batch:0
[ 0.023122] DMA32 zone: 14133 pages used for memmap
[ 0.023122] DMA32 zone: 904493 pages, LIFO batch:63
[ 0.041604] Normal zone: 1984 pages used for memmap
[ 0.041606] Normal zone: 126976 pages, LIFO batch:31
[ 0.044289] ACPI: PM-Timer IO Port: 0x408
[ 0.044291] ACPI: Local APIC address 0xfee00000
[ 0.044297] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.044308] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.044310] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.044311] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.044312] ACPI: IRQ0 used by override.
[ 0.044313] ACPI: IRQ9 used by override.
[ 0.044315] Using ACPI (MADT) for SMP configuration information
[ 0.044316] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.044320] TSC deadline timer available
[ 0.044321] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.044335] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.044336] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.044337] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.044337] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.044338] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.044339] PM: Registered nosave memory: [mem 0xdd90a000-0xddb1cfff]
[ 0.044339] PM: Registered nosave memory: [mem 0xddb1d000-0xddc34fff]
[ 0.044340] PM: Registered nosave memory: [mem 0xddc35000-0xdedd8fff]
[ 0.044341] PM: Registered nosave memory: [mem 0xdedda000-0xdee1cfff]
[ 0.044342] PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
[ 0.044343] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.044343] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.044344] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.044344] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.044344] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.044345] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.044345] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.044346] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.044346] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.044346] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.044347] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.044347] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.044349] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.044350] Booting paravirtualized kernel on bare hardware
[ 0.044353] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.132626] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[ 0.132632] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.132892] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
[ 0.132897] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
[ 0.132897] pcpu-alloc: [0] 0 1 2 3
[ 0.132914] Built 1 zonelists, mobility grouping on. Total pages: 1019263
[ 0.132914] Policy zone: Normal
[ 0.132916] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=2904cad1-70df-4887-9ffc-3da40cec687b ro quiet
[ 0.139585] Calgary: detecting Calgary via BIOS EBDA area
[ 0.139587] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.155355] Memory: 3949484K/4141860K available (10252K kernel code, 1247K rwdata, 3312K rodata, 1596K init, 2264K bss, 192376K reserved, 0K cma-reserved)
[ 0.155433] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.155439] Kernel/User page tables isolation: enabled
[ 0.155474] ftrace: allocating 31917 entries in 125 pages
[ 0.165881] rcu: Hierarchical RCU implementation.
[ 0.165882] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.165883] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.168434] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.172423] Console: colour VGA+ 80x25
[ 0.172427] console [tty0] enabled
[ 0.172439] ACPI: Core revision 20180810
[ 0.172579] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.172587] hpet clockevent registered
[ 0.172591] APIC: Switch to symmetric I/O mode setup
[ 0.172952] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.192590] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c959cc3377, max_idle_ns: 440795261353 ns
[ 0.192601] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.08 BogoMIPS (lpj=12372176)
[ 0.192602] pid_max: default: 32768 minimum: 301
[ 0.192623] Security Framework initialized
[ 0.192623] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.192635] AppArmor: AppArmor initialized
[ 0.193356] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.193783] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.193804] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.193818] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.193988] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.193989] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.194000] CPU0: Thermal monitoring enabled (TM1)
[ 0.194009] process: using mwait in idle threads
[ 0.194012] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.194012] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.194013] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.194014] Spectre V2 : Mitigation: Full generic retpoline
[ 0.194015] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.194015] Speculative Store Bypass: Vulnerable
[ 0.194039] SRBDS: Vulnerable: No microcode
[ 0.194040] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.194187] Freeing SMP alternatives memory: 24K
[ 0.196654] smpboot: CPU0: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.196730] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.196747] ... version: 3
[ 0.196748] ... bit width: 48
[ 0.196748] ... generic registers: 8
[ 0.196748] ... value mask: 0000ffffffffffff
[ 0.196749] ... max period: 00007fffffffffff
[ 0.196749] ... fixed-purpose events: 3
[ 0.196750] ... event mask: 00000007000000ff
[ 0.196784] rcu: Hierarchical SRCU implementation.
[ 0.197079] random: crng done (trusting CPU's manufacturer)
[ 0.197282] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.197315] smp: Bringing up secondary CPUs ...
[ 0.197374] x86: Booting SMP configuration:
[ 0.197374] .... node #0, CPUs: #1 #2 #3
[ 0.202976] smp: Brought up 1 node, 4 CPUs
[ 0.202976] smpboot: Max logical packages: 1
[ 0.202976] smpboot: Total of 4 processors activated (24744.35 BogoMIPS)
[ 0.204768] devtmpfs: initialized
[ 0.204768] x86/mm: Memory block size: 128MB
[ 0.204929] PM: Registering ACPI NVS region [mem 0xddb1d000-0xddc34fff] (1146880 bytes)
[ 0.204929] PM: Registering ACPI NVS region [mem 0xdedda000-0xdee1cfff] (274432 bytes)
[ 0.204929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.204929] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.204929] pinctrl core: initialized pinctrl subsystem
[ 0.204929] NET: Registered protocol family 16
[ 0.204929] audit: initializing netlink subsys (disabled)
[ 0.204929] audit: type=2000 audit(1604314441.032:1): state=initialized audit_enabled=0 res=1
[ 0.204929] cpuidle: using governor ladder
[ 0.204929] cpuidle: using governor menu
[ 0.204929] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204929] ACPI: bus type PCI registered
[ 0.204929] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204929] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.204929] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.204929] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.204929] PCI: Using configuration type 1 for base access
[ 0.204929] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.205170] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.205170] ACPI: Added _OSI(Module Device)
[ 0.205170] ACPI: Added _OSI(Processor Device)
[ 0.205170] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.205170] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205170] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.205170] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.210489] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.211711] ACPI: Dynamic OEM Table Load:
[ 0.211716] ACPI: SSDT 0xFFFF8FB099FCB000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.212000] ACPI: Dynamic OEM Table Load:
[ 0.212003] ACPI: SSDT 0xFFFF8FB099A98400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.212184] ACPI: Dynamic OEM Table Load:
[ 0.212186] ACPI: SSDT 0xFFFF8FB099ABEC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.212872] ACPI: Interpreter enabled
[ 0.212886] ACPI: (supports S0 S3 S4 S5)
[ 0.212887] ACPI: Using IOAPIC for interrupt routing
[ 0.212904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.213115] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.218173] ACPI: Power Resource [FN00] (off)
[ 0.218230] ACPI: Power Resource [FN01] (off)
[ 0.218283] ACPI: Power Resource [FN02] (off)
[ 0.218336] ACPI: Power Resource [FN03] (off)
[ 0.218391] ACPI: Power Resource [FN04] (off)
[ 0.218764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.218768] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.218923] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.219016] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.219016] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.219330] PCI host bridge to bus 0000:00
[ 0.219331] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.219332] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.219333] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.219334] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.219335] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.219336] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.219336] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.219337] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.219338] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.219339] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.219340] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.219346] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.219419] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.219450] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.219534] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.219556] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
[ 0.219619] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.219684] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.219707] pci 0000:00:16.0: reg 0x10: [mem 0xf711a000-0xf711a00f 64bit]
[ 0.219776] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.219848] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.219868] pci 0000:00:1a.0: reg 0x10: [mem 0xf7118000-0xf71183ff]
[ 0.219945] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.220012] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.220031] pci 0000:00:1b.0: reg 0x10: [mem 0xf7110000-0xf7113fff 64bit]
[ 0.220100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.220166] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.220251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220323] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.220407] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.220485] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.220504] pci 0000:00:1d.0: reg 0x10: [mem 0xf7117000-0xf71173ff]
[ 0.220582] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.220649] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[ 0.220807] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.220823] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.220829] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.220835] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.220841] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.220847] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.220853] pci 0000:00:1f.2: reg 0x24: [mem 0xf7116000-0xf71167ff]
[ 0.220889] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220949] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.220965] pci 0000:00:1f.3: reg 0x10: [mem 0xf7115000-0xf71150ff 64bit]
[ 0.220984] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.221082] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000
[ 0.221096] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.221105] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.221113] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.221118] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.221124] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.221128] pci 0000:01:00.0: enabling Extended Tags
[ 0.221178] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.221208] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[ 0.221220] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.221252] pci 0000:01:00.1: enabling Extended Tags
[ 0.221328] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.221330] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.221331] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.221333] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.221372] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.221437] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.221470] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.221502] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.221521] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.221640] pci 0000:03:00.0: supports D1 D2
[ 0.221641] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221753] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.221755] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.221762] pci 0000:00:1c.1: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.222185] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222221] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.222256] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.222290] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.222323] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.222357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.222391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.222637] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.222637] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.222637] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.222637] vgaarb: loaded
[ 0.222637] pps_core: LinuxPPS API ver. 1 registered
[ 0.222637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.222637] PTP clock support registered
[ 0.222637] EDAC MC: Ver: 3.0.0
[ 0.222637] PCI: Using ACPI for IRQ routing
[ 0.222637] PCI: pci_cache_line_size set to 64 bytes
[ 0.222637] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.222637] e820: reserve RAM buffer [mem 0xdd90a000-0xdfffffff]
[ 0.222637] e820: reserve RAM buffer [mem 0xdedda000-0xdfffffff]
[ 0.222637] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
[ 0.222637] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.222637] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.222637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.222637] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.224605] clocksource: Switched to clocksource tsc-early
[ 0.232145] VFS: Disk quotas dquot_6.6.0
[ 0.232160] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.232243] AppArmor: AppArmor Filesystem Enabled
[ 0.232258] pnp: PnP ACPI init
[ 0.232352] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.232356] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.232421] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.232423] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.232424] system 00:01: [io 0xffff] has been reserved
[ 0.232425] system 00:01: [io 0xffff] has been reserved
[ 0.232426] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.232427] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.232427] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.232428] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.232431] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232450] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.232487] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.232490] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.232581] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.232582] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.232583] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232746] pnp 00:05: [dma 0 disabled]
[ 0.232780] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.232816] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.232818] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232992] pnp 00:07: [dma 3]
[ 0.233061] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.233221] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.233222] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.233223] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.233224] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.233225] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.233226] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.233227] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.233228] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.233229] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.233230] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.233231] system 00:08: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.233234] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233327] pnp: PnP ACPI: found 9 devices
[ 0.238751] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.238760] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.238762] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.238765] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.238766] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.238768] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.238778] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.238780] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.238785] pci 0000:00:1c.1: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.238791] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.238792] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.238793] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.238793] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.238794] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.238795] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.238796] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.238797] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.238798] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.238799] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.238800] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.238800] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.238801] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.238802] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.238803] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.238870] NET: Registered protocol family 2
[ 0.239009] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.239025] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.239086] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.239187] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.239214] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.239230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.239273] NET: Registered protocol family 1
[ 0.239277] NET: Registered protocol family 44
[ 0.239680] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.239689] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.239690] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.239697] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.239763] Unpacking initramfs...
[ 0.686474] Freeing initrd memory: 35292K
[ 0.686504] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.686506] software IO TLB: mapped [mem 0xd990a000-0xdd90a000] (64MB)
[ 0.687050] Initialise system trusted keyrings
[ 0.687058] Key type blacklist registered
[ 0.687099] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.687975] zbud: loaded
[ 0.825048] Key type asymmetric registered
[ 0.825049] Asymmetric key parser 'x509' registered
[ 0.825055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.825077] io scheduler noop registered
[ 0.825077] io scheduler deadline registered
[ 0.825096] io scheduler cfq registered (default)
[ 0.825097] io scheduler mq-deadline registered
[ 0.825476] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.825486] intel_idle: MWAIT substates: 0x1120
[ 0.825487] intel_idle: v0.4.1 model 0x3A
[ 0.825584] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.825765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.846255] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.846767] Linux agpgart interface v0.103
[ 0.846803] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.846803] AMD IOMMUv2 functionality not available on this system
[ 0.847114] i8042: PNP: No PS/2 controller found.
[ 0.847239] mousedev: PS/2 mouse device common for all mice
[ 0.847262] rtc_cmos 00:02: RTC can wake from S4
[ 0.847391] rtc_cmos 00:02: registered as rtc0
[ 0.847401] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.847408] intel_pstate: Intel P-state driver initializing
[ 0.847679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.848237] NET: Registered protocol family 10
[ 0.858570] Segment Routing with IPv6
[ 0.858598] mip6: Mobile IPv6
[ 0.858601] NET: Registered protocol family 17
[ 0.858650] mpls_gso: MPLS GSO support
[ 0.859098] mce: Using 9 MCE banks
[ 0.859152] microcode: sig=0x306a9, pf=0x2, revision=0x12
[ 0.859315] microcode: Microcode Update Driver: v2.2.
[ 0.859329] sched_clock: Marking stable (855323336, 3984855)->(874242405, -14934214)
[ 0.859606] registered taskstats version 1
[ 0.859607] Loading compiled-in X.509 certificates
[ 0.893734] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.893745] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 0.893759] zswap: loaded using pool lzo/zbud
[ 0.893831] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.894095] rtc_cmos 00:02: setting system clock to 2020-11-02 10:54:02 UTC (1604314442)
[ 0.895131] Freeing unused kernel image memory: 1596K
[ 0.948629] Write protecting the kernel read-only data: 16384k
[ 0.949404] Freeing unused kernel image memory: 2028K
[ 0.949685] Freeing unused kernel image memory: 784K
[ 0.961872] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.961873] x86/mm: Checking user space page tables
[ 0.967851] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.967853] Run /init as init process
[ 1.019224] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.019241] ACPI: Power Button [PWRB]
[ 1.019274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.019281] ACPI: Power Button [PWRF]
[ 1.029836] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.029838] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.030003] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.030004] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.039494] ACPI: bus type USB registered
[ 1.039495] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.039509] usbcore: registered new interface driver usbfs
[ 1.039516] usbcore: registered new interface driver hub
[ 1.039534] usbcore: registered new device driver usb
[ 1.040912] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.042781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.043015] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[ 1.043019] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.043021] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.043022] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.043023] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.043025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.043025] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 1.043027] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.043027] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.043277] ehci-pci: EHCI PCI platform driver
[ 1.043363] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.043367] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.043377] ehci-pci 0000:00:1a.0: debug port 2
[ 1.047284] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.047533] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7118000
[ 1.050527] libphy: r8169: probed
[ 1.050555] SCSI subsystem initialized
[ 1.050931] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, d4:3d:7e:32:ce:31, XID 2c900800, IRQ 24
[ 1.050933] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.051511] cryptd: max_cpu_qlen set to 1000
[ 1.056434] AVX version of gcm_enc/dec engaged.
[ 1.056435] AES CTR mode by8 optimization enabled
[ 1.060609] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.060661] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.060663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060663] usb usb1: Product: EHCI Host Controller
[ 1.060664] usb usb1: Manufacturer: Linux 4.19.0-12-amd64 ehci_hcd
[ 1.060665] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.060789] libata version 3.00 loaded.
[ 1.060906] hub 1-0:1.0: USB hub found
[ 1.060911] hub 1-0:1.0: 2 ports detected
[ 1.061660] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.061665] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.063676] ahci 0000:00:1f.2: version 3.0
[ 1.069556] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.076622] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.076624] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.089037] scsi host0: ahci
[ 1.089299] scsi host1: ahci
[ 1.089482] scsi host2: ahci
[ 1.089602] scsi host3: ahci
[ 1.089675] scsi host4: ahci
[ 1.089757] scsi host5: ahci
[ 1.089797] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 25
[ 1.089797] ata2: DUMMY
[ 1.089799] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 25
[ 1.089799] ata4: DUMMY
[ 1.089800] ata5: DUMMY
[ 1.089800] ata6: DUMMY
[ 1.406938] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410932] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412111] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[ 1.412190] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[ 1.412268] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[ 1.412562] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[ 1.412664] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20180810/psparse-516)
[ 1.412936] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 1.412937] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.413866] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[ 1.413944] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[ 1.414022] ata3.00: configured for UDMA/100
[ 1.418666] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[ 1.418743] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20180810/psparse-516)
[ 1.419017] ata1.00: configured for UDMA/133
[ 1.419126] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
[ 1.420910] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
[ 1.428690] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.428695] sd 0:0:0:0: [sda] Write Protect is off
[ 1.428696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.428701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.471324] sda: sda1 sda2 < sda5 >
[ 1.471622] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.708604] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[ 1.708609] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns
[ 11.062887] xhci_hcd 0000:00:14.0: can't setup: -110
[ 11.062951] clocksource: Switched to clocksource tsc
[ 11.062967] xhci_hcd 0000:00:14.0: USB bus 2 deregistered
[ 11.062996] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 11.063007] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 11.063021] ehci-pci 0000:00:1d.0: debug port 2
[ 11.063083] xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -110
[ 11.063163] xhci_hcd: probe of 0000:00:14.0 failed with error -110
[ 11.066923] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 11.066935] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[ 11.080844] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 11.080917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 11.080918] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.080919] usb usb2: Product: EHCI Host Controller
[ 11.080920] usb usb2: Manufacturer: Linux 4.19.0-12-amd64 ehci_hcd
[ 11.080921] usb usb2: SerialNumber: 0000:00:1d.0
[ 11.081122] hub 2-0:1.0: USB hub found
[ 11.081130] hub 2-0:1.0: 2 ports detected
[ 11.086884] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 11.086887] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 11.087210] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 11.296841] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 11.325862] PM: Image not found (code -22)
[ 11.416849] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 11.453151] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 11.453154] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.453545] hub 1-1:1.0: USB hub found
[ 11.453666] hub 1-1:1.0: 6 ports detected
[ 11.573177] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 11.573180] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.573612] hub 2-1:1.0: USB hub found
[ 11.573772] hub 2-1:1.0: 8 ports detected
[ 11.740817] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 11.854734] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c512, bcdDevice=30.07
[ 11.854737] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.854739] usb 1-1.2: Product: USB Receiver
[ 11.854740] usb 1-1.2: Manufacturer: Logitech
[ 11.860836] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.872712] usbcore: registered new interface driver usbhid
[ 11.872713] usbhid: USB HID core driver
[ 11.876414] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C512.0001/input/input2
[ 11.932846] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 11.933088] logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[ 11.933405] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C512.0002/input/input3
[ 11.993128] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
[ 12.048871] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0716, bcdDevice=97.27
[ 12.048875] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 12.048876] usb 1-1.4: Product: USB Storage
[ 12.048878] usb 1-1.4: SerialNumber: 000000009727
[ 12.057333] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 12.057477] scsi host6: usb-storage 1-1.4:1.0
[ 12.057595] usbcore: registered new interface driver usb-storage
[ 12.059022] usbcore: registered new interface driver uas
[ 13.070282] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
[ 13.071155] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
[ 13.071972] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
[ 13.072771] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0 CCS
[ 13.073551] scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
[ 13.077506] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 13.080724] sd 6:0:0:4: [sdf] Attached SCSI removable disk
[ 13.082600] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 13.083223] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 13.086348] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 34.092954] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 35.694143] systemd[1]: Inserted module 'autofs4'
[ 35.845224] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 35.864959] systemd[1]: Detected architecture x86-64.
[ 35.871123] systemd[1]: Set hostname to <debian>.
[ 37.192691] systemd[1]: Reached target User and Group Name Lookups.
[ 37.192860] systemd[1]: Listening on udev Control Socket.
[ 37.192989] systemd[1]: Listening on Journal Audit Socket.
[ 37.194031] systemd[1]: Created slice system-getty.slice.
[ 37.194085] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 37.194157] systemd[1]: Listening on udev Kernel Socket.
[ 37.194244] systemd[1]: Listening on Syslog Socket.
[ 37.761055] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 37.781089] lp: driver loaded but no devices found
[ 37.846613] ppdev: user-space parallel port driver
[ 37.910100] parport_pc 00:07: reported by Plug and Play ACPI
[ 37.910161] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 37.938962] systemd-journald[292]: Received request to flush runtime journal from PID 1
[ 38.008912] lp0: using parport0 (interrupt-driven).
[ 38.374079] version 39.2
[ 38.418087] ipmi device interface
[ 38.800384] nvidia: loading out-of-tree module taints kernel.
[ 38.800400] nvidia: module license 'NVIDIA' taints kernel.
[ 38.800400] Disabling lock debugging due to kernel taint
[ 38.808333] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 38.819714] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[ 38.819987] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 38.919357] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 418.152.00 Tue Jun 2 00:46:46 UTC 2020
[ 39.015423] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 418.152.00 Tue Jun 2 00:34:30 UTC 2020
[ 39.263005] loop: module loaded
[ 39.346213] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 39.346217] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 39.609148] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 41.963289] audit: type=1400 audit(1604314483.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=359 comm="apparmor_parser"
[ 41.963296] audit: type=1400 audit(1604314483.564:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=359 comm="apparmor_parser"
[ 41.976198] audit: type=1400 audit(1604314483.576:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=361 comm="apparmor_parser"
[ 41.976202] audit: type=1400 audit(1604314483.576:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=361 comm="apparmor_parser"
[ 41.976205] audit: type=1400 audit(1604314483.576:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=361 comm="apparmor_parser"
[ 42.012660] audit: type=1400 audit(1604314483.612:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=364 comm="apparmor_parser"
[ 42.012663] audit: type=1400 audit(1604314483.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=364 comm="apparmor_parser"
[ 42.036430] audit: type=1400 audit(1604314483.636:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=360 comm="apparmor_parser"
[ 42.102100] audit: type=1400 audit(1604314483.704:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=367 comm="apparmor_parser"
[ 42.102976] audit: type=1400 audit(1604314483.704:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=365 comm="apparmor_parser"
[ 42.473897] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 42.723752] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.723775] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 42.723795] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 42.723813] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 42.723830] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 42.723848] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 42.723866] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 42.761044] iTCO_vendor_support: vendor-support=0
[ 42.797090] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 42.797128] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 42.797214] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 42.798420] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 42.798421] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 42.798421] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 42.798422] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 43.150724] EDAC ie31200: No ECC support
[ 44.536363] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 44.536377] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 44.639549] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 44.639552] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 44.639553] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 44.639554] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 44.639555] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 44.639556] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 44.639557] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 44.639558] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 44.652237] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 44.652273] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 44.652303] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 44.652332] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 44.652361] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 44.653156] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 44.653207] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 44.654110] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 45.045922] intel_rapl: Found RAPL domain package
[ 45.045925] intel_rapl: Found RAPL domain core
[ 45.045929] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 45.353828] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 45.353897] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 45.462017] Adding 4141052k swap on /dev/sda5. Priority:-2 extents:1 across:4141052k FS
[ 46.976934] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 46.977151] caller _nv029891rm+0x58/0x90 [nvidia] mapping multiple BARs
[ 47.266419] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 47.266637] caller _nv000936rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[ 51.898490] snd_hda_intel 0000:00:1b.0: control 2:0:0:PCM Playback Volume:0 is already present
[ 56.988390] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 57.019355] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 57.019445] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 57.019522] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 57.019525] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 57.019722] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 57.130913] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 57.131352] r8169 0000:03:00.0 enp3s0: Link is Down
[ 60.094386] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 60.094397] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 142.446678] fuse init (API version 7.27)
[ 431.282583] show_signal_msg: 17 callbacks suppressed
[ 431.282587] lxrandr[3611]: segfault at 30 ip 00007f48a82d65ee sp 00007ffc13d35de0 error 4 in libgtk-x11-2.0.so.0.2400.32[7f48a812e000+25f000]
[ 431.282596] Code: e0 0f 8e b5 01 00 00 48 8b 74 24 08 44 89 e2 48 89 d9 48 89 ef e8 52 f0 ff ff 48 8b 7c 24 10 e8 f8 cc e5 ff 66 0f ef c0 31 f6 <48> 8b 78 30 0f 29 44 24 30 0f 29 44 24 40 0f 29 44 24 50 0f 29 44
[ 695.057685] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 695.176237] usb 2-1.5: New USB device found, idVendor=13fe, idProduct=1f23, bcdDevice= 1.10
[ 695.176240] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 695.176242] usb 2-1.5: Product: STORE N GO
[ 695.176243] usb 2-1.5: Manufacturer: Verbatim
[ 695.176245] usb 2-1.5: SerialNumber: 0786019222F5
[ 695.176791] usb-storage 2-1.5:1.0: USB Mass Storage device detected
[ 695.177021] scsi host7: usb-storage 2-1.5:1.0
[ 696.195171] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 696.195651] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 696.428830] sd 7:0:0:0: [sdg] 7827456 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 696.429589] sd 7:0:0:0: [sdg] Write Protect is off
[ 696.429591] sd 7:0:0:0: [sdg] Mode Sense: 23 00 00 00
[ 696.430251] sd 7:0:0:0: [sdg] No Caching mode page found
[ 696.430257] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 696.435718] sdg: sdg1
[ 696.438461] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 696.930734] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 707.026422] audit: type=1400 audit(1604315148.671:29): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/utilisateur1/.cache/thumbnails/normal/a739c20cc0cfad241556ff3e380ed13f.png" pid=3859 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
root@debian:/home/utilisateur1# ^C
root@debian:/home/utilisateur1#
